The EPBBB-I is a industrial temp (-40° to +85°c) compact, cost-effective, and powerful platform for developing high performance applications including data acquisition, imaging, medical and industrial control.
At only 3.4” x 2.1”, the board will fit into compact spaces, while the USB port (via USB), and Ethernet port plus the EBC connector provide the necessary control I/O.
At the heart of the EPBBB-I is the Texas Instruments Sitara AM3358 processor with ARM Cortex A8 core.
This processor is a highly integrated SoC with a core at speeds up to 1.0GHz, a flash controller, DDR3L RAM controller, USB 2.0 host and
The high level of integration increases performance, while lowering system power consumption and cost.
The board stack is supported by the U-Boot bootloader and BSPs for Linux.
Processor: Texas Instruments Sitara AM3358 at 1GHz with Cortex-A8 Core
Memory: RAM: 512MB DDR3L
FLASH: 4GB 8 bit eMMC on board FLASH storage
Serial Ports: One UART on board, three on EBC
USB Client: USB 2.0 Power and Communications
USB Host: Applications
Graphics: HDMI and 3D Accelerator
Operating Temp: -40° to +85°c
Form Factor: Fanless compact size
Software: U-Boot Bootloader and Linux BSP available
Notes: We can customize this design for your specific application requirements.