NXP MPC8641 AMC Processor Board

The EP8641A is a single width, full height AMC processor board featuring the high performance NXP MPC8641 dual-core PowerPC processor operating at up to 1.5GHz.

The EP8641A is a single width, full height MPC8641 Advanced Mezzanine Card processor board featuring the high performance NXP MPC8641D dual-core PowerPC processor operating at up to 1.5GHz. In addition to the AMC configuration the EP8641A can operate as a stand-alone module and boot from on board flash allowing for rapid application development outside of the integrated ATCA or MicroTCA environment. With Linux, VxWorks, and INTEGRITY operating support, the EP8641A is built for a broad range of demanding applications in telecom, wireless basestations, media gateways, enterprise network access systems, test and measurement systems, and server blades.

For fabric connectivity the EP8641A offers extreme flexibility, while maintaining standards compliance. All versions of the board support gigabit ethernet on AMC channels 0 an 1, compliant with AMC.2, Type E2). Separate versions of the board are available in one of the following configurations: Serial RapidIO on AMC channels 4-7, PCI Express on AMC channels 4-11, or PCI Express on channels 4-7 and Serial RapidIO on channels 8-11.

At the heart of the EP8641A is a NXP MPC8641D dual-core PowerPC processor. The MPC8641D is a highly integrated system-on-chip (SoC) platform that includes duals e600 PowerPC cores, an integrated security engine, integrated PCI Express, Serial RapidIO, and Gigabit Ethernet controllers, and an integrated DDR2 memory interface. The highly integrated SoC architecture improves system performance, simplifies board design, lowers power consumption, and reduces cost.

Contact us for more information

Request A Quote

Features

Runs as a standalone development board!
  • Form Factor: Single width, full height AMC.0
  • Processor: NXP MPC8641D dual-core PowerPC processor operating at up to 1.5GHz
  • Memory: 1GB DDR2 , and 128MB of NOR flash
  • Front Panel: 2 x GbE connections and 1 x RS-232 serial monitor port
  • AMC Fabric Connectivity: Serial RapidIO on AMC channels 4-7, PCI Express on AMC channels 4-11, or PCI Express on channels 4-7 and Serial RapidIO on channels 8-11.
  • Power Supply: Via AMC connector per AMC.0 or from barrel connector when in stand alone mode
  • Debug: JTAG/COP via an onboard connector and available on the AMC connector
  • Software: U-Boot bootloader and Linux BSP available.

Request A Quote For This Product!

  • This field is for validation purposes and should be left unchanged.
Page Reader Press Enter to Read Page Content Out LoudPress Enter to Pause or Restart Reading Page Content Out LoudPress Enter to Stop Reading Page Content Out LoudScreen Reader Support